[A-5]
New toner transport motor (M6)
(1)
Remove 3 screws to take off the top cover.
(2)
Disconnect 1 connector to release the
harness from the clamp.
(3)
Remove 2 screws to take off the inner cover.
(4)
Remove 1 screw.
(5)
Remove 3 screws to take off the toner drive
section.
e-STUDIO555/655/755/855
DEVELOPER UNIT
Top cover
Screw
Connector
Drive unit
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
11 - 14
Screw
Fig. 11-14
Connector
Clamp
Fig. 11-15
Cover
Fig. 11-16