2.5
Installation and Replacement of Covers
[A] Front cover (Upper/Lower)
(1)
Open the front cover (upper). Turn 2 hinge
pins to point at the front side and pull them
out upward. Then take off the front cover
(upper).
(2)
Open the front cover (lower). Then take off
the cover by lifting it up.
[B] Front right inner cover
(1)
Take off the front cover
(
P.2-41 "[A] Front cover (Upper/Lower)").
(2)
Remove 2 screws to take off the front right
inner cover.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-31
Fig. 2-32
Fig. 2-33
2 - 41
Front cover ( upper )
Front cover ( lower )
Front right inner cover
e-STUDIO555/655/755/855
OUTLINE OF THE MACHINE
2