Toshiba e-STUDIO555 Service Manual page 300

(8) Remove 2 screws and disconnect 1
connector.
(9) Remove 1 C-ring (rear).
(10) Remove 1 E-ring and take off the gear and
one-way clutch.
(11) Remove 2 screws and take off the bearing
(rear).
(12) Remove 1 C-ring (front).
e-STUDIO555/655/755/855
FUSER UNIT
Screw
Connector
Screw
Bearing ( rear )
Screw
Gear, One-way clutch
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
13 - 26
C-ring ( rear )
Fig. 13-37
Screw
E-ring
Fig. 13-38
C-ring ( front )
Fig. 13-39