Toshiba e-STUDIO555 Service Manual page 120

[B] LCD inverter board (INV-LCD)
(1) Take off the control panel unit.
P.5-12 "[A] Control panel unit"
(2) Remove 2 screws and disconnect 2
connectors, and then take off the LCD
inverter board.
[C] DSP board (DSP)
(1) Take off the control panel unit.
P.5-12 "[A] Control panel unit"
(2) Remove 2 connectors of the LCD inverter
board.
(3) Remove 2 screws and disconnect 2 shielding
wire, and then take off the bracket.
Note:
When assembling, be sure to install them in
the correct order.
e-STUDIO555/655/755/855
CONTROL PANEL
Shielding wire
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
5 - 14
LCD inverter board
Fig. 5-13
LCD inverter board
Fig. 5-14
Shielding wire
Fig. 5-15