Replacement Of The Gearbox Control Shaft (Engine Disassembled); Engagement System Check - Husqvarna TR 650 TERRA 2013 Workshop Manual

3
1
2
2
3
4
Workshop Manual Ed.09-2012
CRANKCASE DISASSEMBLY
TR 650 TERRA 2013 - TR 650 STRADA 2013

Replacement of the gearbox control shaft (engine disassembled)

Removal:
-
2
-
H11635
Installation:
-
1
H11636
-
-
-
5
8
-
6
7
H11637

Engagement system check

-
5
9
H11638
Move the lever (1) outwards and extract the gearbox shaft (2) complete with
lever (1).
Extract the ratchet (3) and spring
Insert into the crankcase the ratchet (2) with the spring (1) in correspondence
with the star of the selector drum.
Latch the spring (3) to the lever (4).
Insert the spring (5) with the bushing (6) and the thrust washer (7) onto the
gearbox shaft (8).
Insert into the crankcase the gearbox shaft (8) placing it into the ratchet (2).
Make sure that the spring (5) is properly inserted into the retainer (9).
Test proper gearbox operation by checking if the ratchet engages and dis-
engages all the gears correctly from the star positioned on the selector drum
(You should hear a "click" at engagement).
F3.18