Tightening Torque Figures - Husqvarna TR 650 TERRA 2013 Workshop Manual

TIGHTENING TORQUE FIGURES

TR 650 TERRA 2013 - TR 650 STRADA 2013
X
Section
Tighten all nuts and screws to the specified torque using a torque wrench. If not tightened securely, a nut or a screw
might become damaged or work itself loose, causing damage to motorcycle and injury to rider. An overtightened nut
or screw might become damaged, its thread might strip, or the nut/screw might fail and work itself loose. Listed in the
table are the tightening torque figures for the most important nuts and screws, which have determined in accordance
with thread diameter, pitch and specific application. These figures are obtained after cleaning the threads with solvent.
All tightening indicated with the letter "S" (Safety) must be checked at each service or whenever other maintenance/
repair work is carried out.
Screws applied with a bonding agent must be replaced each time they are removed.
Workshop Manual Ed. 09-2012
X.1