Crankshaft Locking Screw Removal; Camshaft Removal/Replacement - Husqvarna TR 650 TERRA 2013 Workshop Manual

TR 650 TERRA 2013 - TR 650 STRADA 2013
2
3
4
5
CYLINDER HEAD REMOVAL/DISASSEMBLY

Crankshaft locking screw removal

- Remove the locking screw (1) and re-tighten the screw (2) to torque, replac-
ing the gasket.
1
H11499
H11654

Camshaft removal/replacement

- Remove the head cover and lock the engine at the top dead centre, as de-
scribed in the relevant paragraphs.
Removal:
1
- Remove the screws (1) with the washers.(2).
2
- Remove the top part of the support (3).
- Remove the chain (4) from the gears and fix to a point safe to avoid it from
falling into the engine.
- Remove the camshafts (5) with the chain gears.
5
H11493
F2.5
Workshop Manual Ed.09-2012