Coolant Replacement - Husqvarna TR 650 TERRA 2013 Workshop Manual

3
4
Workshop Manual Ed. 09-2012
SETTINGS AND ADJUSTMENTS
TR 650 TERRA 2013 - TR 650 STRADA 2013

Coolant replacement

Drainage
- Place the motorcycle on its side stand.
- Remove the cap (1) of the expansion tank (2).
- Place a 2 litre container under the water pump and unscrew the screw (3).
- Let a small amount of coolant drain out and then turn the radiator cap (4) to
the first click and wait for all the coolant to flow out of the water pump drain-
age hole.
1
Filling
- Re-tighten screw (2) on the water pump.
- Remove the radiator cap (4).
2
- Pour the coolant into the radiator (5) until it is full and gradually top up as the
level drops until it stays at maximum level.
- Put the radiator cap on again and pour the coolant into the expansion tank
(2) until it reaches maximum level.
- Put the cap (1) of the expansion tank on again.
- Start the engine, wait for the radiator cooling fan to start up and then wait
another 3 minutes.
- Switch off the engine and wait for it to cool, then check the level as described
in the relevant paragraph.
5
H11691
H11692
5
H11693
D.12