Removal Of Tail Light; Removal Of Rear Turning Indicators - Husqvarna TR 650 TERRA 2013 Workshop Manual

1
2
2
Workshop Manual Ed. 09-2012
GENERAL PROCEDURES
TR 650 TERRA 2013 - TR 650 STRADA 2013

Removal of tail light

Remove the saddle, the luggage rack, the rear tail cover and the antitheft device
compartment cover as described in the relevant paragraphs.
- Unscrew the two screws (1), disconnect the connector (2) and remove the
tail light (3).
H11815
3
H11816

Removal of rear turning indicators

Remove the saddle, the luggage rack, the rear tail cover and the antitheft device
compartment cover as described in the relevant paragraphs.
DX
- Disconnect the two connectors (1).
- Unscrew the screws (2) and remove the turning indicators (3).
1
H11817
3
H11818
H11819
During the reassembly of the turning indicators, make sure that the
water discharge hole (4) faces downwards and that the connector
of the right-hand turning indicator is connected to the connector
marked with a white adhesive tape of the bike harness.
4
E.12