Tr 650 Terra 2013 - Tr 650 Strada 2013 - Husqvarna TR 650 TERRA 2013 Workshop Manual

Hide thumbs Also See for TR 650 TERRA 2013:
Table of Contents

Advertisement

RECOMMENDED SHOP PRACTICES
Before disassembling components or before performing repair operations, clean the motorbike removing possible mud, dust, or
foreign bodies.
-
Put the vehicle in a well lit area;
-
Fasten the vehicle in a steady position so that it cannot overturn; use suitable stands and belts.
-
Use suitable equipment for lifting/removing heavy parts.
-
Use appropriate keys (not pliers) to loosen/tighten nuts and screws.
-
When loosening or tightening nuts or bolts, always begin with the bigger ones or from the centre. Tighten to the specified torque
and follow a cross pattern or a dedicated pattern as outlined in the relevant section.
-
Always mark any parts or positions that might be confused upon assembly.
-
Use special tools where specified.
-
Clean thoroughly the removed components before refitting them
-
During the reassembly, make sure that the bearings turn freely without obstruction or without getting stuck, otherwise replace
them
-
Always replace the seals, the sealing rings, the split pins, the screws with damaged thread, and the self-locking nuts with new
parts.
-
Use genuine HUSQVARNA parts and the recommended lubricant brands.
-
At the end of a repair or periodic maintenance, test the vehicle before delivering it to the customer.
Electrical parts
-
Disconnect the electrical component connectors by pressing the special safety hooks.
-
Make sure that inside the connector there is no dirt or rust; if need be, clean them with an air jet or suitable products.
-
Make sure that the cables are correctly seamed to the connector terminals.
-
When you reconnect the connectors, ensure the correct coupling.
Do not disconnect the connectors by pulling the electrical cables.
-
Technical Bulletins might contain more up-to-date setting data and procedures than this manual. Be sure to read them.
Where not specified, refit the previously removed components following the procedures in the reverse order with
respect to the removal.
Workshop Manual Ed. 09-2012
IMPORTANT NOTICES

TR 650 TERRA 2013 - TR 650 STRADA 2013

b.4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr 650 strada 2013

Table of Contents