Front Turning Indicator Removal - Husqvarna TR 650 TERRA 2013 Workshop Manual

1
5
6
H11901
Workshop Manual Ed. 09-2012
GENERAL PROCEDURES
TR 650 TERRA 2013 - TR 650 STRADA 2013

Front turning indicator removal

- Remove the front fairing as described in the relevant paragraph.
- Unscrew the screw (1) and remove the support (2).
2
H11898
- Disconnect the left turning indicator connector (3).
3
2
H11899
- Unscrew the screw (4) and remove the entire left turning indicator (5).
4
H11900
Retrieve the nut after unscrewing the screw (4).
Repeat the above steps to remove the right turning indicator.
During the reassembly of the turning indicators, make sure that the
water discharge hole (6) faces downwards and that the connector
of the right-hand turning indicator is connected to the connector
marked with a white adhesive tape of the bike harness.
E.18