Husqvarna TR 650 TERRA 2013 Workshop Manual page 263

Hide thumbs Also See for TR 650 TERRA 2013:
Table of Contents

Advertisement

5
8
6
10
Workshop Manual Ed. 09-2012
ELECTRICAL SYSTEM
TR 650 TERRA 2013 - TR 650 STRADA 2013
- Lift the headlamp fairing (5) off the lower clips and turn it to the right.
H111100
- Cut the ties (6) and open the clamp (7).
- Disconnect the alarm system antenna connector (8).
7
H12001
9
- Remove the ignition switch connector (9) and remove it from the headlight
support.
H12063
- Unscrew the two screws (10) and remove the ignition switch (11).
- Reverse the removal procedure to reassemble, making sure you put the cables
11
back in the same position they were before.
10
H12003
When reassembling, put the cables back in their origin position
and secure the connector (8) and the alarm system antenna cable
as before using the two ties (6) and the rubber clamp (7).
Reassemble a new ignition switch by following the steps in reverse
order and make sure you put the cables back in the same position
they were before.
To replace the part, use the diagnostic tool and follow the guided
procedure.
M.42

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tr 650 strada 2013

Table of Contents