Removal/Refitting The Countershaft And Checking Axial Clearance - Husqvarna TR 650 TERRA 2013 Workshop Manual

TR 650 TERRA 2013 - TR 650 STRADA 2013
1
3
2
4
5
1
4
5
CRANKCASE DISASSEMBLY

Removal/refitting the countershaft and checking axial clearance

- Disassemble the crankcase as described in the relevant paragraph.
Removal:
- Match the marking (1) of the countershaft and marking (2) of the crankshaft
with the crankcase marking (3).
H11613
- First remove the crankshaft (4), followed by the countershaft (5), paying at-
tention to the spacer rings of the crankshaft.
H11614
Installation:
- Place the right crankcase half with the flywheel side facing down.
- Oil the crankcase bearing seats.
- Position the crankshaft washer on the right casing.
2
- Insert the countershaft (5) and the crankshaft (4) in the crankcase, placing
them aligned with the marking (1) on the countershaft and the mark (2) on
3
the crankshaft must coincide with the mark (3) on the crankcase.
- Insert the oiled thrust washer for crankshaft into the crankcase.
H11620
H11614
F3.11
Workshop Manual Ed.09-2012