Husqvarna TR 650 TERRA 2013 Workshop Manual page 205

TR 650 TERRA 2013 - TR 650 STRADA 2013
8
7
11
15
14
13
12
2
BRAKES
- Loosen the screw (7) and remove the cable ring (8).
- Cut the clamps that fasten the system.
H11852
- Undo the screws (9) and detach the speed sensor (10).
- Remove the calliper (11) together with all the other system components.
9
10
H11853
- If it is necessary to replace the master cylinder (2), open the clamp (12) and
detach the line (13), collecting all the fluid draining from the reservoir, then
undo the union (14) and disconnect the delivery line (15).
H11854
When reassembling, fit the rear brake line in exactly the same posi-
tion as before, fastening with the relative clamps and the relative
hose guide. If the braking system has been disassembled, replace
all the seal washers, then fill the system with fluid and bleed as
described in the relative paragraph.
L.7
Workshop Manual Ed. 09-2012