Stand Rotative Switch Replacement; Water Temperature Sensor Replacement - Husqvarna TR 650 TERRA 2013 Workshop Manual

2
1
6
4
Workshop Manual Ed. 09-2012
ELECTRICAL SYSTEM
TR 650 TERRA 2013 - TR 650 STRADA 2013

Stand rotative switch replacement

- Loosen the nut (1) and remove the switch (2) from the stand.
H11790
- Disconnect the connector (3).
- Replace the switch (2); during the reassembly, insert the switch tab (4) in the
3
hole (5) of the stand and the upper part of the switch in the centring pin (6).
2
4
H12009
6
H12070

Water temperature sensor replacement

2
- Remove the expansion tank and drain the cooling system as described in the
relevant paragraph.
- Disconnect the connector (1) and remove it.
- Loosen the sensor (2); replace and tighten it to torque (see Chapter F4).
1
H12010
M.46