Chain Tensioner Removal/Installation; Locking The Crankshaft - Husqvarna TR 650 TERRA 2013 Workshop Manual

3
Workshop Manual Ed.09-2012
CYLINDER HEAD REMOVAL/DISASSEMBLY
TR 650 TERRA 2013 - TR 650 STRADA 2013

Chain tensioner removal/installation

1
Removal:
-
-
2
Installation:
-
-
H11491
H11490

Locking the crankshaft

Rotate the motor in the normal direction of rotation, as indicated in the previous
paragraph, until the markings (dashes) on the gears of the camshafts are in
position coplanar with the sealing surface.
Remove the screw (1) with the sealing ring.
Check that the notch on the crankshaft is visible through the hole.
Fully screw down the retaining screw (2) manually; the screw must perfectly
engage in the notch of the crankshaft.
H11487
1
H11488
Remove the screw (1) with the sealing ring (2).
Remove the chain tensioner (3) from the hole.
Insert the chain tensioner (3) into the hole.
Replace the sealing ring (2) and tighten the screw (1) to torque.
F2.4
2
H11653