Husqvarna TR 650 TERRA 2013 Workshop Manual page 213

TR 650 TERRA 2013 - TR 650 STRADA 2013
1
H11874
2
H11875
3
4
H11876
2
H11877
BRAKES
REPLACEMENT FRONT BRAKE PADS
- Remove safety split pin (1).
- Knock the pin (2) out partially.
- Undo the two screws (3) and remove the calliper (4).
- Remove the pin (2) completely.
- Remove the brake pad (5), retrieving the clip (6).
- Install the new brake pads.
- Insert the pin (2) to hold the pads in place.
- Refit the calliper (4), tightening the screws (3) to the correct torque.
- Insert the pin (2) completely and refit the split pin (1).
Do not use the brake lever while removing the pads.
Acting as described above, after replacing the pads it is not necessary to bleed
the system, just act the control lever several time until the pistons get in the
normal position.
L.15
5
H11878
6
H11879
Workshop Manual Ed. 09-2012