Setting Units Of Measurement - Husqvarna TR 650 TERRA 2013 Workshop Manual

1
> 4"
> 4"
> 4"
Workshop Manual Ed. 09-2012
ELECTRICAL SYSTEM
TR 650 TERRA 2013 - TR 650 STRADA 2013

Setting units of measurement

The units of measurement must be set when the motorcycle is stationary and
the key is set to ON.
- Press the "S" button (1) until the word "ODO" or "TEMP" appears on the display.
- Press the "S" button for more than 4 seconds. The word "SET" appears on the
display and the unit of measurement currently in use.
- Press the "S" button once to change the unit of measurement. Once you
have selected the unit of measurement, press the "S" button" for more than 4
seconds to confirm the set data and go onto the next scale.
H111088
The following units of measurement can be set:
Km / mp = the display will show:
- the speed in "km/h" or "mp/h" ;
- the total distance covered in "km" or "mp"
- the partial "TRIP" distance covered in "km" or "mp".
Temperature = °C / °F
Quantity of fuel:
L = (litres) - UG = US/GAL - IG = IM/GAL
- To quit the "SET" stage once you have made your last setting, press the "S"
button for more than 4 seconds. If not, the program automatically quits after
10 seconds.
H111089
M.38