Husqvarna TR 650 TERRA 2013 Workshop Manual page 184

Workshop Manual Ed. 09-2012
FRONT SUSPENSION
TR 650 TERRA 2013 - TR 650 STRADA 2013
Assembly
For the reassembly of the front end, proceed as follows:
- Use grease to lubricate the new bearings before fitting them on the chassis.
- Fit the bottom yoke (1) complete with the dust seal (2) and the washer (3)
- Fit the upper dust seal (6) and tighten the ring nut (7) by hand.
- Initially tighten the ring nut to 15 Nm and then loosen it.
- Retighten the ring nut in order to annul any clearance, but in a manner that
permits the steering to turn freely to the right and to the left.
- Fit the steering head (8) and tighten the nut (9) by hand.
7
6
5
4
3
2
1
I.6
9
8
H11985