Wheel Axle Warpage; Axle Runout Over 100 Mm; Wheel Rim Warpage - Husqvarna TR 650 TERRA 2013 Workshop Manual

2
1
CHASSIS AND WHEELS
TR 650 TERRA 2013 - TR 650 STRADA 2013
PIN
REAR
H10901
PIN
FRONT
H10902
H10903

Wheel axle warpage

Use a feeler gauge to check the pint out-of-round; if the value of the warpage
exceeds the max allowed limit, replace it.

Axle runout over 100 mm

Wheel axle
Wheel axle
less than 0.039 in.
1

Wheel rim warpage

The table below reports the allowed limits for wheel rim warpage. An excessive
side runout and out-of-round are generally caused by worn out bearings. In
1
these cases, replace the bearings and the sealing rings. If this does not solve
the problem, change the wheel rim or the wheel.
1
Standard
1
C
Side runout
2
Out-of-round
MAX
1
MIN
Y.13
Standard
less than 0.1 mm 0.2 mm (0.079 in.)
less than 0.5 mm (0.02 in.)
less than 0.8 mm (0.03 in.)
Workshop Manual Ed. 09-2012
Max. limit
Max. limit
2 mm (0.079 in.)