Reassembly Of Engine - Husqvarna TR 650 TERRA 2013 Workshop Manual

18
18
Workshop Manual Ed. 09-2012
GENERAL PROCEDURES
TR 650 TERRA 2013 - TR 650 STRADA 2013
-
19
-
-
-
20
H11980
-

Reassembly of engine

Reassemble by following the steps in reverse order and make sure you:
-
-
-
H11981
24
25
H11984
21
H11982
Remove the front support cross-member (18) by unscrewing the upper screws
(19) that connect it to the chassis and the lower screws (20) that connect it
to the engine.
When reassembling, insert the screws from the left and the nuts
from the right.
Unscrew the lower screws (21) that fasten the engine to the chassis.
Remove the swinging arm pin (22).
Unscrew the two upper screws (23) that fasten the engine to the chassis.
When reassembling, align the spacer (24) with the right upper screw.
Lower the hoister keeping the engine (25) balanced and then remove the
engine from the front.
reassemble the swinging arm by performing the steps in the relevant para-
graph for adjustment of axial clearance;
position the cable harnesses correctly;
tighten the screws (19), (20), (21), (23) and (24) correctly.
23
E.42
22
H11983