Removing The M.2 Fru From The Avago Sas3004Imr Raid Controller Card; Installing An M.2 Fru On The Avago Sas3004Imr Pcie Raid Controller Card - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
4.3.7 Removing the M.2 FRU from the Avago SAS3004iMR RAID
Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Procedure
Step 1 Determine the position of the M.2 FRU on the Avago SAS3004iMR RAID controller card.
Step 2 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
1.
2.
3.
Figure 4-9 Removing an M.2 FRU
Step 3 Place the removed component in an ESD bag.
----End
4.3.8 Installing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
Procedure
Step 1 Determine the position of the M.2 FRU on the Avago SAS3004iMR RAID controller card.
Step 2 Install an M.2 FRU on the Avago SAS3004iMR PCIe RAID controller card.
Issue 06 (2019-08-10)
Open the handle of the M.2 FRU. See (1) in
Remove the M.2 FRU. See (2) in
Place the removed M.2 FRU into an ESD bag.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-9.
Figure 4-9.
4 Parts Replacement
62