Removing The Avago Sas3004Imr Pcie Raid Control Card - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
l
l
Step 13 Install the PCIe card.
For details, see
Step 14 Install the cover.
For details, see
Step 15 Install the compute node.
For details, see
Step 16 Power on the compute node.
For details, see
Step 17 Configure the RAID controller card.
The following uses the LSI SAS3008IR RAID controller card as an example.
1.
2.
----End

4.3.5 Removing the Avago SAS3004iMR PCIe RAID Control Card

Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Remove the air duct.
For details, see
Step 6 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 7 Remove the M.2 FRU from the Avago SAS3004iMR RAID controller card.
Issue 06 (2019-08-10)
If yes, go to Step 13.
If no, go to Step 14.
3.12 Installing a PCIe
3.6 Installing the
3.4 Installing a CH121
3.2 Power-On
Log in to the Configuration Utility.
For details, see LSI SAS3008IR> Initial Configuration (Legacy/Dual Mode) or Initial
Configuration (EFI/UEFI Mode) > Logging In to the Configuration Utility in
Huawei V5 Server RAID Controller Card User
Activate RAID.
For details, see LSI SAS3008IR> Common Tasks (Legacy/Dual Mode) > Activating a
RAID Configuration in
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
3.7 Removing the Air
Copyright © Huawei Technologies Co., Ltd.
Card.
Cover.
V5.
Procedure.
Huawei V5 Server RAID Controller Card User
Procedure.
V5.
Cover.
Ducts.
4 Parts Replacement
Guide.
Guide.
60