Removing The Air Ducts - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
1.
2.
Figure 3-11 Installing the cover
Step 4 Install the compute node.
For details, see
Step 5 Power on the compute node.
For details, see
----End

3.7 Removing the Air Ducts

Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Determine the position of the air duct.
Issue 06 (2019-08-10)
Aligning the notches on the cover with the nail heads on the chassis base, vertically place
the cover onto the compute node. See (1) in
Push the cover towards the front panel of the compute node until the cover clicks into
place. See (2) in Figure
3.4 Installing a CH121
3.2 Power-On
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
Copyright © Huawei Technologies Co., Ltd.
Figure
3-11.
V5.
Procedure.
Procedure.
V5.
Cover.
3 Basic Operations
3-11.
18