Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual page 82

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
l
l
Step 7 Remove the PCIe card.
For details, see
Step 8 Determine the position of the processor.
Figure 4-21 Positions of processors
Step 9 Remove the heat sink.
l
Issue 06 (2019-08-10)
If yes, go to Step 7.
If no, go to Step 8.
3.11 Removing a PCIe
Intel heat sink
a. Use a T20 Torx screwdriver to loosen the two diagonal screws (marked 2 on the
label) on the heat sink. See (1) in
b. Use a T20 Torx screwdriver to loosen the two diagonal screws (marked 1 on the
label) on the heat sink. See (2) in
c. Lift the heat sink and place it upside down on the desk.
Copyright © Huawei Technologies Co., Ltd.
Card.
Figure 4-22.
Figure 4-22.
4 Parts Replacement
74