Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual page 43

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
4.
Step 5 In the program(x86)\hioadm directory of drive C, run NVMe Toolbox 4.0 to view the NVMe
drives in running.
Issue 06 (2019-08-10)
Figure 3-28 Mapping between the slot ID and NVMe drive letter
Table 3-1 Mapping between physical slot numbers, B/D/F, and slot IDs
Configuratio Physical Slot
n No.
24 x 2.5" Slot0
NVMe drive
Slot2
configuration
The Device (B/D/F) values vary depending on the setting of the VMD function. The
values in this table are based on the assumption that the VMD function is disabled.
The following uses Huawei NVMe drive as an example to describe how to install the
NVMe driver hiodriver and NVMe tool NVMe Toolbox. The NVMe Toolbox can be
used to query NVMe drive information, upgrade the firmware, and perform hot swap.
NOTE
After installing ES3000 V5 NVMe drives, install the toolkit required by the OS to manage the
drives. The ES3000 V5 tool is incompatible with the built-in NVMe driver of the Windows OS.
Therefore, ensure that you have installed Huawei NVMe driver before using the tool. You can
obtain the tool package from the
SSD Upgrade Guide.
Copyright © Huawei Technologies Co., Ltd.
Root Port Device
(B/D/F) (B/D/F)
85:02.0 86:00.0
85:03.0 87:00.0
official Huawei website. For details, see
3 Basic Operations
Slot ID
80
81
Huawei ES3000 V5
35