FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
1.
2.
3.
Figure 4-10 Installing an M.2 FRU
----End
4.3.9 Removing the Supercapacitor
Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Determine the position of the supercapacitor.
Issue 06 (2019-08-10)
Take a spare M.2 FRU out of its ESD bag.
Open the handle of the M.2 FRU and push the M.2 FRU into the slot of the Avago
SAS3004iMR RAID control card. See (1) in
Close the handle of the M.2 FRU. See (2) in
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure
Procedure.
V5.
Cover.
4 Parts Replacement
4-10.
4-10.
63