Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual page 113

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
For details, see
Step 18 Check the indicator status. If the health status indicator is steady green, the compute node is
running properly.
For details, see
Step 19 To burn the original SN into the new mainboard after replacement, contact Huawei engineers.
If the original device SN is not burnt in the new mainboard, the iBMC and OS cannot obtain
the device SN. This may affect the running of some services or the monitoring and
management on the device.
Step 20 After the mainboard is replaced, the LOM is replaced and the MAC address of the LOM is
changed. If the LOM is used for transferring data, you need to configure the LOM data.
Step 21 After the mainboard is replaced, the iBMC and BIOS settings are restored to the default
settings of the new mainboard. Configure the iBMC and BIOS based on service requirements.
Step 22 Upgrade the iBMC, BIOS, and CPLD to the versions used before the replacement
(recommended) or to the latest versions.
For details, see
----End
Issue 06 (2019-08-10)
3.2 Power-On
10.1.2 Indicators and
NOTE
l If you have iBMC and BIOS configuration files imported before the replacement of the mainboard,
you can import the configuration files after the replacement. However, the exported configuration
files do not contain password information. You need to manually configure the password for the
iBMC user. For details, see iBMC WebUI > Configuration > Import/Export in
E9000 Server iBMC User
l The iBMC and BIOS configuration files exported from the iBMC contain the configuration list. For
details, see "Configuration File Description" in
Guide.
l The iBMC supports import and export of configuration files from version 2.32.
l If the iBMC/BIOS configuration files are not imported before you replace the mainboard, manually
configure the iBMC and BIOS data after the replacement.
E9000 Server V100R001 Upgrade
Copyright © Huawei Technologies Co., Ltd.
Procedure.
Buttons.
Guide.
FusionServer Pro E9000 Server iBMC User
Guide.
4 Parts Replacement
FusionServer Pro
105