FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
Figure 4-2 Removing an M.2 FRU
Step 3 Place the removed component in an ESD bag.
Step 4 Install a filler panel for the M.2 FRU to ensure optimal shielding for EMC.
----End
4.3.2 Installing an M.2 FRU
Procedure
Step 1 Determine the position of the M.2 FRU.
Figure 4-3 Positions of the M.2 FRUs
Step 2 Remove the filler panel.
Issue 06 (2019-08-10)
NOTE
Perform this operation only when a M.2 FRU is not installed immediately.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
55