Logging In To The Ibmc Webui - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
l
Procedure
Step 1 Access the BIOS interface.
Step 2 Choose Advanced > IPMI iBMC Configuration, and press Enter.
The IPMI iBMC Configuration screen is displayed.
Step 3 Select iBMC Configuration and press Enter.
The iBMC Configuration screen is displayed,
Step 4 Check the IP address of the iBMC management network port.
----End

12.2 Logging In to the iBMC WebUI

Scenarios
Log in to the iBMC WebUI. The following uses Internet Explorer 11.0 as an example.
Procedure
Step 1 Check that the client (for example, a local PC) used to access the iBMC meets the running
environment requirements.
If you want to use the remote control function, ensure that the Java Runtime Environment
(JRE) meets requirements.
Table 12-1 Running environment
OS
Windows 7 32-bit
Windows 7 64-bit
Issue 06 (2019-08-10)
MM910 CLI
Run the smmget -l bladeN -d bmcip command.
For details, see MM910 Management Module V100R001 Command
NOTE
l A maximum of four users can log in to the iBMC WebUI at the same time.
l By default, the system timeout period is 5 minutes. If no operation is performed on the WebUI
within 5 minutes, the user will be automatically logged out of the WebUI.
l The system locks a user account if the user enters incorrect passwords for consecutive five times.
The user account is automatically unlocked five minutes later. The system administrator can also
unlock a user account using the command line.
l For security purposes, change the initial password after the first login and change your password
periodically.
Copyright © Huawei Technologies Co., Ltd.
Browser
Internet Explorer 9.0 to 11.0
Mozilla Firefox 39.0 to 54.0
Google Chrome 21.0 to 44.0
12 Common Operations
Reference.
JRE
JRE 1.7 U45
JRE 1.8 U45
JRE 1.8 U144
146