Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual page 89

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
2.
Step 12 Install the processor carrier to the heat sink.
1.
Issue 06 (2019-08-10)
Figure 4-31 Pasting patterns
Use a clean card or blade to smear the thermal compound over the entire center of the
CPU.
The thickness of the thermal compound is about that of a piece of ordinary paper. Ensure
that the thermal compound is evenly and fully coated.
Figure 4-32 Smeared thermal compound layer
Aligning the processor corner with a triangle mark with the corner of the heat sink with a
notched triangle, buckle the processor carrier on the heat sink.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
81