SUN600-(5KTL, 6KTL)-L0
User Manual
9.1 Removing an Inverter
Procedure
Step 1 Power off the inverter. For details, see
Step 2 Disconnect all cables from the inverter, including signal cables, DC input power
cables, AC output power cables, and PE cables.
Step 3 Remove the WLAN antenna or the Smart Dongle from the inverter.
Step 4 Remove the inverter from the mounting bracket.
Step 5 Remove the mounting bracket.
----End
9.2 Packing an Inverter
●
●
9.3 Disposing an Inverter
If the inverter service life expires, dispose the inverter according to the local
disposal rules for electrical equipment and electronic component waste.
Issue 04 (2023-02-17)
If the original packaging is available, put the inverter inside it and then seal it
using adhesive tape.
If the original packaging is unavailable, put the inverter inside a suitable hard
carton and seal it properly.
Copyright © Huawei Technologies Co., Ltd.
9
Inverter Disposal
8.1 System
Power-Off.
9 Inverter Disposal
89