Installing A Processor - Huawei FusionServer Pro CH121 V5 V100R005 Maintenance And Service Manual

FusionServer Pro CH121 V5 Compute Node
Maintenance and Service Guide
Figure 4-27 Installing a CPU socket cover
----End

4.3.14 Installing a Processor

l Do not wear ESD gloves during processor replacement. The gloves may catch on pins on
l The same model of processors must be used in a server.
l Before installing a processor, clean the surface of the processor, the heat sink, and the
l Intel heat sinks or Huawei-developed heat sinks are used, depending on the processor
Procedure
Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Issue 06 (2019-08-10)
the processor socket and damage it.
processor carrier. If there is residual thermal compound, use a tissue to clean it.
cooling solution.
3.1 Power-Off
3.3 Removing a CH121
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
4 Parts Replacement
78