Removing A Smartli - Huawei SmartLi 1.0 User Manual

SmartLi 1.0
User Manual
Figure 5-4 Connecting control cables
Step 4 On the home screen, choose Settings > System Settings, and set Battery cabinet
quantity to 5.
Step 5 Power on the new SmartLi by referring to section "5.1 Powering On Batteries".
After pressing and holding the POWER ON/OFF button on the battery control unit
of the new SmartLi for more than 2s, you need to confirm that the Cabinet
quantity mismatch alarm is cleared before turning on the battery circuit breaker.
----End

5.6 Removing a SmartLi

Context
This section describes how to remove a SmartLi by using five cabinets in parallel
as an example. The original system consists of five combined cabinets. Now, you
need to remove SmartLi 3.
Issue 08 (2022-11-15)
NO TE
In this case, the Cabinet quantity mismatch alarm is generated.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Operations
81