Smu11B; Logging In To The Webui - Huawei ETP4860-B1A2 User Manual

ETP4860-B1A2 Embedded Power
User Manual
Step 3 Check that the indicators on the rectifiers are steady green.
Step 4 Measure the voltage between the -48 V busbar and the RTN+ busbar. The value
should range from -42 V DC to -58 V DC.
----End

6.2 SMU11B

6.2.1 Logging In to the WebUI

Step 1 Set the PC IP address in the same network segment as the SMU IP address.
The SMU has a default IP address of 192.168.0.10, a subnet mask of
255.255.255.0, and a default gateway of 192.168.0.1, set the IP address to
192.168.0.11, subnet mask to 255.255.255.0, and default gateway to 192.168.0.1
on the PC.
Figure 6-1 Setting the PC IP address (Windows 10 is used as an example)
Step 2 Enter https://
in the address box of Internet Explorer and press Enter. The login page is
displayed.
Issue 04 (2021-01-05)
NO TE
If the IP address of the SMU11B is changed on the WebUI, record the IP address for future
login.
local IP address for the SMU (default address: https://192.168.0.10)
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning
56