Terminals On The Audio Control Card - Honeywell Vigilon 4 loop Generic Commissioning Instructions

Terminals on the Audio Control Card

Descriptions of ACC terminals
Terminals Description
L
R
These terminals accept the connection of background
music, for example pre amplified output of an amplifier.
24V, B, A, PA1, These terminals accept the connection of a microphone for
PTT and 0V PA application.
PA2, PTT2 and 0V These terminals are for future use to accept the connection
of a second microphone.
O/A, O/B, I/A and These terminals accept the audio loop circuit connections.
I/B (for Audio loop 1 Here the 'O' in O/A and O/B signify output, while the 'I' in
and 2) I/A and I/B signify input. There are two audio loops and
these are Audio loops 1 & 2. If the second audio loop is
not being used then it must be linked out, as illustrated.
4188-856_issue 7_07/15_Generic Vigilon (Compact + VA) Comms.
Vigilon 4/6 loops & Compact (VA) panels & network nodes
AUDIO LOOP 1
PA PA MIC 1
B A 0V O/A O/B I/A
24V PA1 PTT1
P12
P14
FOR FUTURE USE
PA MIC 2
L
R
PA2 PTT2
P10
BGM
P15
AUDIO
BGM
PA MIC 1 PA MIC2 LOOP 1
L R
24V B A PTT 0V 0V PA2 PTT2 0V O/A O/B I/A I/B O/A O/B I/A I/B
P15 P14 P10 P12 P13
FS2
FS1
AUDIO LOOP 1
BGM MPG MIC PA
AUDIO LOOP 2
LD1
P1 -
SMT
P2
P3
P9
P4
AUDIO 1
P4
MICROPHONE
P11
AUDIO 2
AUDIO LOOP 2
I/B O/A O/B I/A I/B
P13
0V
AUDIO
LOOP 2
How to link out an
audio loop if it is
not being used
O/A O/B I/A I/B
AUDIO LOOP
Message card
with Audio Pack
-SMT
P2
47