Table of Contents
Advertisement
Commissioning instructions
Message
associated with..
LPC
Sector actioned
(loop processor card)
LPC
Sector enabled/
disabled at card x
(loop processor card)
LRT
Seeking radio devices
LPC
Sensor faulty
(loop processor card)
Sensor out of
LPC
specification
(loop processor card)
number x on Loop y
channel z
Sensor restored
Radio (Plexus) Device
Shared memory
Any Card
hardware is faulty at
card x
Slave Device
LPC
Replaced
(loop processor card)
number x on loop y
LPC
Slave micro failed at
card x
(loop processor card)
Software errors
Software errors will activate
a system reset
Sounder circuit
Device
failed
Device
Sounder circuit
Restored
134
meaning..
Sector is switched ON/OFF.
The sector(s) has been enabled or disabled
automatically or manually.
Radio LRT is finding all of the radio devices
Wireless system - sensor head needs cleaning or
sensor head lost from a wireless base (wireless adaptor)
Also mean - Fault pattern has been matched.
Fault pattern has been matched.
A Radio (Plexus) Device head has been restored.
There is MCC / MCB problem.
Slave type device has been replaced.
Loop driver is watchdogged by loop processor.
Software error
There is a fault with the sounder hardware on the
S-Cubed or S-Quad.
The fault is on the sounder circuit associated with
S-Quad or S-Cubed has been restored.
..possible action
-
If necessary, manually enable/disable the sector
using the [control] menu.
-
Check and replace the sensor if necessary.
Check and replace the sensor if necessary.
-
Replace all other cards first other than the
MCC/MCB to see if the problem is resolved.
If it persists then replace MCC / MCB.
-
Reset and ignore single occurrence. Record in
the log book.
Software errors will activate a system reset.
Ignore single occurrence. Record the event in
the log book.
Replace the device
-
4188-856_issue 7_07/15_Generic Vigilon (Compact + VA) Comms.
Advertisement
Table of Contents
