Plexus Device Status - Honeywell Vigilon 4 loop Generic Commissioning Instructions

Plexus Device Status

Use the controls at the Vigilon Control panel select [Info] ->
momentarily select <etc> in order to find and select [Status] ->
[Device] and enter the device number or range whose status is
required, then select [Loop ] and enter the loop number on
which the Plexus devices reside and then select [Enter]. The
panel displays the status of device(s):
Radio Call Point
Loop 2 No. 43 Radio Call Point
I/O:...O Anal:5, 6
2nd:0 3rd:0 LRT:41
Zone 2 Zone 2
S:000005098244
P1:42 RSSI:48
This is the RSSI which is a
measure of the link quality with
the linked Parent
having address 42
This is the RSSI which is a
measure of the link quality with
the linked
address 41
This is the serial number given of the Radio call point,
which is the same number as the one printed on a label
inside the Call point on its PCB.
4188-856_issue 7_07/15_Generic Vigilon (Compact + VA) Comms.
15:45
ID:3040
P2:41 RSSI:49 Batt:40
This is the network ID
Months of charge remaining
device
dependent on use.
A device battery fault
indication is given closer to
end of useful battery life.
Parent device having
Vigilon 4/6 loops & Compact (VA) panels & network nodes
Radio Sounder Strobe
Loop 1 No. 47 Radio Sounder Strobe
I/O:.00O Anal:5,6
2nd:0 3rd:0 LRT:41
Zone 4 Zone 4
S:010010485766 ID:3040
P1:43 RSSI:47 P2:42
Radio Optical detector
Loop 1 No. 51 Radio optical
I/O:...O Anal:1,5
2nd:0 3rd:0 LRT:41
Zone 4 Zone 4
S:039100006577 ID:3040
P1:47 RSSI:41 P2:51
Radio Heat detector
Loop 1 No. 45 Radio Heat
I/O:...O Anal:2, 5
2nd:0 3rd:0 LRT:41
Zone 2 Zone 2
S:136110645425 ID:3040
P1:44 RSSI:45 P2:47
Radio Dual Optical Heat detector
Loop 1 No. 51 Radio Dual optical/Heat
I/O:...O Anal:1,2,3,4
2nd:0 3rd:0 LRT:41
Zone 2 Zone 2
S:0471000064440 ID:3040
P1:50 RSSI:44 P2:43
15:47
RSSI:43 Batt:35
15:48
RSSI:44 Batt:59
15:46
RSSI:47 Batt:59
RSSI:42 Batt:59
67