Fitting The Inner Door - Honeywell Vigilon 4 loop Generic Commissioning Instructions

Commissioning instructions

Fitting the inner door

¨
Locate the hinge pins on the inner door assembly into the two hinge pin holes
¨
Fit the earth lead from the backbox to the inner door spade connector
¨
Fit together the two blue connectors of the printer 0V leads
locating
Inner
the hinge pin
door
Backbox
24
j
k
.
l
, the leads are located at the inner door and backbox intersection.
Masking tape
Inner door
Danger
WARNING
REMOVAL OF COVER
EXPOSES HIGH V H VOLTAGES
on the backbox outer face.
Earth spade
for connection from
backbox
Preformed ribbon
cables held together
under masking tape
to be fitted during
commissioning
Card guide
Transit position of
printer paper roll
and holder pin held
together with an elasticband
Connector for
printer 0V
Paper roll
holder bracket
Hinge point
Cables of external circuits
Earth to
inner door
Transparent
cover over
backplane
Printer 0V
BACKBOX (Part view)
4188-856_issue 7_07/15_Generic Vigilon (Compact + VA) Comms.