Epson RC90 Manual page 69

4. Describe an example to set the master and the slave as the setting below.
5. Start up the PC.
6. Select the Start menu-[SYCON.net] and execute it.
7. Set a Confirm password of SYCON.net.
RC700 / RC90 Option Fieldbus I/O Rev.14
Setting item
Master MACID
Slave MACID
Baud Rate
Slave Input Bytes
Slave Output Bytes
Click <OK>.
Be careful not to forget the Confirm password.
Value
0
1
500 kbps
20 bytes
20 bytes
2. Installation
57