Epson RC90 Manual page 45

Master Mode
1.
2.
3.
4.
5.
6.
7.
RC700 / RC90 Option Fieldbus I/O Rev.14
Check that the DeviceNet master board manufactured by molex is connected to the
DeviceNet network.
Open the [applicomIO Console] install folder and run the "applicomIO Console"
application.
Following is specified for [applicomIO Console] install folder as default.
C:\Program Files(x86)\BradCommunications\applicomIO\4.1
The [applicomIOR console] dialog box appears. Register the device information
(EDS file) that is necessary for the network setup.
(5)
(4)
Select [Protocol].
Select the [Equipment Library] tab.
Click <Add>.
The [Select configuration files] dialog box appears.
Specify the EDS file that is supplied by the device manufacturer. Click <Open>.
(3)
2. Installation
33