Epson RC90 Manual page 195

(7) Select the configuration file (.csv) for RC+.
(8) Confirm that the configuration file (.csv) for RC+ is imported and click <OK>
(9) Confirm that the following items are displayed.
(10) Click <Apply>.
(11) Click <Close>.
RC700 / RC90 Option Fieldbus I/O Rev.14
Click <Open>.
Total Input Bytes
Total Output Bytes : Number of outputs the master controls (Bytes)
The following dialog box appears.
The Robot Controller automatically starts rebooting.
: Number of inputs the master controls (Bytes)
2. Installation
183