Epson RC90 Manual page 201

Confirmation and Configuration of EPSON RC+ 7.0
When the EtherNet/IP slave board is installed to the Controller, it is recognized
automatically. Confirm whether EPSON RC+ 7.0 has recognized the EtherNet/IP slave
board using the following procedure.
1.
2.
3.
4.
5.
6.
RC700 / RC90 Option Fieldbus I/O Rev.14
Select [Setup]-[System Configuration] and display the [System Configuration] dialog
box.
(2)
Select [Inputs / Outputs].
Confirm that the following items are displayed in "Fieldbus Slave".
Installed : Yes
Inputs : 512-767 (default setting)
Outputs : 512-767 (default setting)
Select [Fieldbus Slave]-[General].
(4)
Confirm that the following items are displayed.
Fieldbus Type
Input Bytes
Output Bytes
Click <Close>.
: EtherNet/IP
: 32 (default setting)
: 32 (default setting)
2. Installation
(3)
(5)
189