Epson RC90 Manual page 196

2. Installation
(12) Select [Setup]-[System Configuration] and display the [System Configuration] dialog
(13) Select [Inputs/Outputs].
(14) Confirm that "Fieldbus Master" displays the following items:
(15) Select [Fieldbus Master]-[General].
(16) Confirm that the following items are displayed.
184
box.
(13)
Installed : Yes
Inputs : "6144" – "6144 + Number of inputs the master controls (Bits)
Outputs : "6144" – "6144 + Number of outputs the master controls (Bits)
(15)
Total Input Bytes
Total Output Bytes :
: Number of inputs the master controls (Bytes)
Number of outputs the master controls (Bytes)
RC700 / RC90 Option Fieldbus I/O Rev.14
(14)
(16)