Epson RC90 Manual page 150

2. Installation
Master Mode
1.
2.
3.
4.
5.
6.
138
Check that the EtherNet/IP master board manufactured by molex is connected to the
EtherNet/IP network.
Start "applicomIO Console" application.
The [applicomIOR console] dialog box appears. Register the device information
(EDS file) that is necessary for the network setup.
(6)
(5)
Select [Protocol].
Select the [Equipment Library] tab.
Click <Add>.
(4)
RC700 / RC90 Option Fieldbus I/O Rev.14