Ip Addresses In Multiswitch Environment - EMC Connectrix EC-1200 Planning Manual

Upgrading to a Single Service Processor Environment
C
10.2.8.4
10.2.8.3
10.2.8.2
10.2.8.1
Cabinet 4
10.4.8.4
10.4.8.3
10.4.8.2
10.4.8.1
Cabinet 4
Connectrix v6.02 Planning Guide
C-8
Figure C-4 shows IP addresses (without leading zeros) in a
four-cabinet multiswitch environment.
10.1.8.4
10.1.8.3
10.1.8.2
10.1.8.1
Cabinet 3
10.3.8.4
10.3.8.3
10.3.8.2
10.2.8.1
Cabinet 3
Service Processor

IP Addresses in Multiswitch Environment

Figure C-4
The above configuration (pairs of cabinets sharing one service processor) is
only an example.
Note that the Ethernet hubs located in the Connectrix cabinets are
connected in a star, or hub and spoke, configuration, with the
central/main hub being the one in which the service processor is
located. This is done so that no managed switch is more than two
hubs away from the controlling service processor.
10.2.8.4
10.2.8.3
10.1.1.1
10.2.8.2
10.2.8.1
Cabinet 2
10.2.8.4
10.3.1.1 10.2.8.3
10.2.8.2
10.2.8.1
Cabinet 2
Client
10.1.8.4
10.1.8.3
10.1.1.1
10.1.8.2
10.1.8.1
Cabinet 1
10.1.8.4
10.1.8.3 10.1.1.1
10.1.8.2
10.1.8.1
Cabinet 1
Server
Service Processor