Ip Addresses And Component Ids; Component Ip Addresses In Cluster 1 - EMC VPLEX Installation And Setup Manual

Reference

IP addresses and component IDs

Management network B addresses
Engine 4:
Director 4B
Director 4A
Engine 3:
Director 3B
Director 3A
FC switch B 128.221.253.34
Engine 2:
Director 2B
Director 2A
Engine 1:
Director 1B
Director 1A
Figure 50
78 EMC VPLEX with GeoSynchrony 4.1 Installation and Setup Guide
The IP addresses of the VPLEX hardware components are determined by a set of
formulae that depend on the internal management network (A or B), the Cluster IP
Seed, and (for directors) the Enclosure ID (which matches the engine number).
Figure 50 on page 78 shows the IP addresses in a cluster with a Cluster IP Seed of 1,
and Figure 51 on page 79
Cluster IP Seed = 1
Enclosure IDs = engine numbers
128.221.253.42
128.221.253.41
128.221.253.40
128.221.253.39
128.221.253.38
128.221.253.37
128.221.253.36
128.221.253.35

Component IP addresses in cluster 1

shows the addresses for a Cluster IP Seed of 2.
Management server
Management network A addresses
Engine 4:
Director 4B 128.221.252.42
Director 4A 128.221.252.41
Engine 3:
Director 3B 128.221.252.40
Director 3A 128.221.252.39
FC switch A 128.221.252.34
Engine 2:
Director 2B 128.221.252.38
Director 2A 128.221.252.37
Engine 1:
Director 1B 128.221.252.36
Director 1A 128.221.252.35
Zep-028_1