EMC Connectrix EC-1200 Planning Manual page 42

EC-1200 Connectrix Cabinet
1
V6 MIB Support
1-28
Connectrix v6.02 Planning Guide
Unsolicited SNMP trap messages signal operational state changes
and failure conditions. Generic SNMP traps include:
coldStart — Reports that the SNMP agent is reinitializing due to a
power-on reset.
warmStart — Reports that the agent is reinitializing due to an
initial machine load (IML) or initial program load (IPL).
authorizationFailure — Reports access by an unauthorized
SNMP manager.
The MIB files are provided in standard ASN.1 syntax and can be
installed into the MIB database of any SNMPv2-compliant Network
Management Station. The files are available for download from the
HTTP server of the Connectrix service processor.
FibreAlliance MIB V3.1
FibreAlliance MIB V3.1 (fcmgmt.mib) has not changed with the 6.0
release. The mappings of the following counters has been enhanced
to support 64 bits:
fcConnUnitPortStatC2RxFrames
fcConnUnitPortStatC2TxFrames
fcConnUnitPortStatC3RxFrames
fcConnUnitPortStatC3TxFrames
fcConnUnitPortStatC3Discards
fcConnUnitPortStatRxObjects
fcConnUnitPortStatTxObjects
fcConnUnitPortStatRxElements
fcConnUnitPortStatTxElements
In addition mapping enhancements were made to support 2 Gb/s
with the
fcConnUnitPortSpeed object
This MIB is implemented by the SNMP agent that runs on the service
processor PC and in the ED-140M, ED-64M, and DS-xxM products.
Use the Configure option in the Connectrix Manager application to
configure access to this MIB from authorized SNMP Network
Management Stations.
SNMP Framework MIB
SNMP Framework MIB (snmp-framework.mib) is needed to
successfully compile and install the FibreAlliance MIB on the
Network Management Station.
No changes were made to this MIB with the 6.02 release.
.