EMC Connectrix EC-1200 Planning Manual page 211

Connectivity Unit
Connectrix
Management
Software
Connectrix Service
Processor
Credit
CTP
DASD
Default
Default Zone
Device
Dialog Box
A hardware component that contains hardware (and possibly
software) that provides Fibre Channel connectivity across a fabric.
Connectrix switches are example of a Connectivity Unit.
The software application that implements the management user
interface for all managed products. The Connectrix Management
software can run either locally on the Connectrix service processor or
remotely on a user workstation.
A PC shipped with a product for the sole purpose of running the
Connectrix Management software.
A numeric value that determines the flow control value for a switch
handling Class 2 traffic in a fabric.
Control Processor, a circuit card or subsystem that contains the
microprocessor director. The CTP also initializes hardware
components of the system after power-on. A 10/100 Mbps RJ-45
twisted pair connector is located on the CTP to connect to the
Ethernet LAN and communicate with the Connectrix service
processor or SNMP management station.
D
Direct Access Storage Device.
Pertaining to an attribute, value, or option that is assumed when none
is explicitly specified.
Contains all attached devices that are not members of any active
Zone.
(1) A piece of equipment, such as a server or storage device, that is
attached to a Connectrix switch or a similar product. A device as
defined here is not controlled by the Connectrix Product Manager
and its operating parameters. (2) In EMC Symmetrix, a uniquely
addressable physical or logical part of the Symmetrix subsystem,
such as a disk. (This description is presented here only to clarify a
term used in other EMC documents.)
A pop-up window containing informational messages or fields to be
modified with desired options. This term is often used
interchangeably with window.
Connectrix v6.02 Planning Guide
Glossary
g-5