Update The Storage System Software And Register Your System; Downloading Usm Documentation; Downloading And Installing The Unisphere Service Manager; Downloading The Latest Version Of The Vnx Operating Environment Software (Optional) - EMC VNX Series Installation Manual

Setup

Update the storage system software and register your system

Downloading USM documentation

Downloading and installing the Unisphere Service Manager

Downloading the latest version of the VNX operating environment software
(optional)
82 EMC VNX Series VNX5600 Unified Installation Guide
The storage system comes pre-installed with the latest version of VNX Operating
Environment (OE) software available at the time of shipment. The Unisphere Service
Manager (USM) is a collection of tools that helps you update, install, register, and
maintain your system hardware and software. Use USM to check for and install an
updated version of the VNX OE software and register your storage system.
Procedure
1. Go to https://support.emc.com
Downloading and Installing USM .
2. For additional information on using USM, go to https://mydocs.emc.com/VNX.
3. Under VNX tasks, select Update VNX software.
4. Select appropriate settings for your configuration to generate a customized procedure.
If you do not already have USM installed on your Windows management station,
download and install the latest version:
Procedure
1. From the https://support.emc.com, select your system
The Downloads page appears.
2. From download list, select the Unisphere Service Manager link and save the software
to your host or management station.
3. In the folder where you saved the USM, double-click the executable (.exe) file.
4. Follow the instructions that appear.
5. When the installation is complete, click Done.
Unisphere Service Manager opens.
6. Click Login.
7. Connect to your system by entering the host name or IP address and click Connect.
EMC recommends downloading and installing the latest version of the operating
environment.
This task is optional.
Procedure
1. Select Software System Software..
>
2. Run the Prepare for Installation wizard to check for an updated version of the VNX OE.
3. If an updated version is available, then run the Install Software wizard to install the
update.
to your model Documentation to download
>
Downloads.
>